Vol. 3 No. 2 (2026) • Articles
Open Access

Klasifikasi Kualitas Karet Menggunakan Metode Random Forest Pada Perusahaan XYZ

Ongki Juliandra
Sriwijaya University image/svg+xml
Alsella Meiriza
Sriwijaya University image/svg+xml
Hardini Novianti
Sriwijaya University image/svg+xml
Mira Afrina
Sriwijaya University image/svg+xml
Ken Ditha Tania
Sriwijaya University image/svg+xml
Published: November 25, 2026 Pages: 570-581
Original Full-Text Article
Download published version for reading and archiving
Abstract

Company XYZ, a crumb rubber processor in Sumatra, Indonesia, assigns each production lot a Low, Medium, or High quality category by laboratory testing, but recorded parameters are not linked to them. This study tests how well Random Forest reproduces the categories from six parameters in 1,031 lots, only 13.5% of which are Low. Random Forest was compared with Support Vector Machine (SVM), Decision Tree, and two naive baselines using hold-out, repeated, and nested cross-validation. Cross-validated macro-F1 of the tuned Random Forest was 0.409, higher than Decision Tree (0.365; p = 0.028) and not significantly different from SVM (0.385; p = 0.13), yet only slightly above random guessing (0.330). No model exceeded the accuracy of always guessing High (0.507), and the Low class fared worst (F1 about 0.23). The six parameters barely differ between classes, so the data carry little class information. The model suits only flagging lots for laboratory re-testing.

Article Metrics & Downloads Graph
Monthly Download Trends:
Author Biographies
Ongki Juliandra Sriwijaya University

Program Studi Sistem Informasi, Fakultas Ilmu Komputer, Universitas Sriwijaya, Kota Palembang, Provinsi Sumatera Selatan, Indonesia.

Alsella Meiriza Sriwijaya University

Program Studi Sistem Informasi, Fakultas Ilmu Komputer, Universitas Sriwijaya, Kota Palembang, Provinsi Sumatera Selatan, Indonesia.

Hardini Novianti Sriwijaya University

Program Studi Sistem Informasi, Fakultas Ilmu Komputer, Universitas Sriwijaya, Kota Palembang, Provinsi Sumatera Selatan, Indonesia.

Mira Afrina Sriwijaya University

Program Studi Sistem Informasi, Fakultas Ilmu Komputer, Universitas Sriwijaya, Kota Palembang, Provinsi Sumatera Selatan, Indonesia.

Ken Ditha Tania Sriwijaya University

Program Studi Sistem Informasi, Fakultas Ilmu Komputer, Universitas Sriwijaya, Kota Palembang, Provinsi Sumatera Selatan, Indonesia.

How to Cite
Juliandra, O., Meiriza, A., Novianti, H., Afrina, M., & Tania, K. D. (2026). Klasifikasi Kualitas Karet Menggunakan Metode Random Forest Pada Perusahaan XYZ. Jurnal Manajemen Dan Teknologi, 3(2), 570-581. https://doi.org/10.63447/jmt.v3i2.2195
License

This work is licensed under a Copyright (c) 2026 Ongki Juliandra, Alsella Meiriza, Hardini Novianti, Mira Afrina, Ken Ditha Tania .

Creative Commons Attribution 4.0 International License (CC BY 4.0)

This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License .

  • Share: You are free to copy, distribute, and transmit the work in any medium or format.
  • Adapt: You are free to remix, transform, and build upon the work for any purpose, even commercially.
  • Attribution: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Copyright & Retention: Authors retain copyright without restrictions and grant this journal the right of first publication under an open-access model. The journal retains non-exclusive publishing rights for archiving, indexing, and scholarly dissemination.

References
Total: 19 References
  1. Achmad, F., Deviany, D., Nuranisa, A., Antika, R., Suhartono, S., & Suharto, S. (2023). Fisibilitas pemanfaatan koagulan alami terhadap karakteristik karet pada produksi SIR 20. Jurnal Penelitian Karet, 41(2), 153–168. https://doi.org/10.22302/ppk.jpk.v41i2.876.
  2. Akbar, H., & Sanjaya, W. K. (2023). Kajian performa metode class weight random forest pada klasifikasi imbalance data kelas curah hujan. Jurnal Sains, Nalar, dan Aplikasi Teknologi Informasi, 3(1). https://doi.org/10.20885/snati.v3i1.30.
  3. Alnuaimi, A. F. A. H., & Albaldawi, T. H. K. (2024). An overview of machine learning classification techniques. BIO Web of Conferences, 97. https://doi.org/10.1051/bioconf/20249700133.
  4. Areewattana, C., Pramotkul, N., Chanjatunat, T., & Deepaisarn, S. (2025). Cup-lump rubber quality estimation from historical weather data using machine learning regressors. Science & Technology Asia, 30(3), 51–59. https://doi.org/10.14456/scitechasia.2025.46.
  5. Bates, S., Hastie, T., & Tibshirani, R. (2024). Cross-validation: What does it estimate and how well does it do it? Journal of the American Statistical Association, 119(546), 1434–1445. https://doi.org/10.1080/01621459.2023.2197686.
  6. Bischl, B., Binder, M., Lang, M., Pielok, T., Richter, J., Coors, S., Thomas, J., Ullmann, T., Becker, M., Boulesteix, A.-L., Deng, D., & Lindauer, M. (2023). Hyperparameter optimization: Foundations, algorithms, best practices, and open challenges. WIREs Data Mining and Knowledge Discovery, 13(2), Article e1484. https://doi.org/10.1002/widm.1484.
  7. Elreedy, D., Atiya, A. F., & Kamalov, F. (2024). A theoretical distribution analysis of synthetic minority oversampling technique (SMOTE) for imbalanced learning. Machine Learning, 113(7), 4903–4923. https://doi.org/10.1007/s10994-022-06296-4.
  8. Ghosh, K., Bellinger, C., Corizzo, R., Branco, P., Krawczyk, B., & Japkowicz, N. (2024). The class imbalance problem in deep learning. Machine Learning, 113(7), 4845–4901. https://doi.org/10.1007/s10994-022-06268-8.
  9. Grinsztajn, L., Oyallon, E., & Varoquaux, G. (2022). Why do tree-based models still outperform deep learning on tabular data? arXiv. https://doi.org/10.48550/arXiv.2207.08815.
  10. Littidej, P., Kromkratoke, W., Pumhirunroj, B., Buasri, N., Prasertsri, N., Sangpradid, S., & Slack, D. (2024). Enhanced rubber yield prediction in high-density plantation areas using a GIS and machine learning-based forest classification and regression model. Forests, 15(9), Article 1535. https://doi.org/10.3390/f15091535.
  11. Opitz, J. (2024). A closer look at classification evaluation metrics and a critical reflection of common evaluation practice. Transactions of the Association for Computational Linguistics, 12, 820–836. https://doi.org/10.1162/tacl_a_00675.
  12. Prastia, B., Bursamin, B., Fernandes, R., & Hidayad, S. (2025). Analysis of dryer control system for non-conformity of the crumb rubber products in PT. Bukit Angkasa Makmur Bengkulu. Jurnal Sains Agro, 10(2).
  13. Putri, G. R., Nadiyah, K., Rishelin, N., Futeri, R., & Susanto, R. A. (2024). Pengendalian kualitas Mooney viscosity (MV) dan plasticity retention index (PRI) dalam crumb rubber SIR 3CV 60 dengan metode statistical quality control (SQC) di perusahaan karet. Jurnal PASTI, 18(3), 315–328. https://doi.org/10.22441/pasti.2024.v18i3.003.
  14. Puttipipatkajorn, A., & Puttipipatkajorn, A. (2021). Spectroscopic measurement approaches in evaluation of dry rubber content of cup lump rubber using machine learning techniques. International Journal of Agricultural and Biological Engineering, 14(3), 207–213. https://doi.org/10.25165/j.ijabe.20211403.6298.
  15. Rosihan, R. I., Kumalasari, R., Widyantoro, M., Saputra, Y., & Haekal, J. (2026). Prediksi kualitas kain pada proses inspeksi tekstil menggunakan machine learning. Jurnal REKAVASI, 14(1), 13–19.
  16. Salman, H. A., Kalakech, A., & Steiti, A. (2024). Random forest algorithm overview. Babylonian Journal of Machine Learning, 2024, 69–79. https://doi.org/10.58496/BJML/2024/007.
  17. Song, H., Kim, M., Park, D., Shin, Y., & Lee, J.-G. (2023). Learning from noisy labels with deep neural networks: A survey. IEEE Transactions on Neural Networks and Learning Systems, 34(11), 8135–8153. https://doi.org/10.1109/TNNLS.2022.3152527.
  18. Supriyadi, A., Sunge, A. S., & Tedi, N. (2025). Analysis of predicting the number of rejected chips using random forest at PT. Wahyu Kartumasindo Internasional. Journal of Computer Networks, Architecture and High Performance Computing, 7(4), 1128–1139. https://doi.org/10.47709/cnahpc.v7i4.7028.
  19. Zaza, S., Atemkeng, M., & Hamlomo, S. (2023). Wine feature importance and quality prediction: A comparative study of machine learning algorithms with unbalanced data. arXiv. https://doi.org/10.48550/arXiv.2310.01584.
Most read articles by the same author(s)

Other papers published by author(s) in this journal:

Klasterisasi Karakteristik Pengguna E-Commerce Berdasarkan Profil Pengguna Menggunakan Algoritma K-Prototypes
Pengaruh Personalisasi Rekomendasi Produk Terhadap Perilaku Pembelian Konsumen Dengan Trust Sebagai Variabel Mediasi Pada Pengguna Shopee
Analisis Komparatif Pola Pembelian Konsumen Marketplace pada Periode Weekdays dan Weekends Menggunakan Algoritma FP-Growth
Perbandingan IndoBERT dan mBERT Untuk Klasifikasi Toksisitas Pada Chat Roblox dan Minecraft Berbahasa Indonesia
Perbandingan Ketahanan Lintas-Domain Indobert dan SVM Pada Ulasan Game dan Media Sosial Berbahasa Indonesia