Pengembangan Sistem Kipas Angin Pintar Berbasis IoT untuk Pemantauan Suhu dan Kelembapan secara Real-Time

Authors

  • Yoga Sofyan Arief Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika
  • Yuma Akbar Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika

DOI:

https://doi.org/10.63447/jimik.v6i3.1607

Keywords:

Internet of Things (IoT), Smart Fan, Adaptive Control, Temperature and Humidity, NodeMCU ESP8266

Abstract

The increase in indoor temperature and humidity often leads to discomfort and excessive energy consumption in conventional fans operated manually. This study aims to develop a smart fan system based on the Internet of Things (IoT) with adaptive control, capable of monitoring temperature and humidity in real-time and adjusting fan speed automatically or manually via a smartphone application. The system was built using a DHT11 temperature and humidity sensor, a NodeMCU ESP8266 microcontroller, and the Blynk IoT platform as the primary interface. Test results show that the sensor achieved an accuracy of ±0.8°C for temperature and ±3% for humidity, with an average data transmission latency of < 2 seconds and a fan response time of < 1 second. The system operated stably for approximately 1 hours without connection interruptions. By applying adaptive control through hysteresis logic, the system has the potential to reduce energy consumption by dynamically adjusting the fan duty cycle compared to conventional fans. This development contributes to creating an adaptive, comfortable, and energy-efficient indoor environment.

Downloads

Download data is not yet available.

Author Biographies

  • Yoga Sofyan Arief, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika

    Program Studi Teknik Informatika, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika, Kota Jakarta Timur, Daerah Khusus Ibukota Jakarta, Indonesia.

  • Yuma Akbar, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika

    Program Studi Teknik Informatika, Sekolah Tinggi Ilmu Komputer Cipta Karya Informatika, Kota Jakarta Timur, Daerah Khusus Ibukota Jakarta, Indonesia.

References

Ab Rahman, R., Hashim, U. R. A., & Ahmad, S. (2020). IoT based temperature and humidity monitoring framework. Bulletin of Electrical Engineering and Informatics, 9(1), 229-237. https://doi.org/10.11591/eei.v9i1.1557.

Geck, C. C., Alsaad, H., Voelker, C., & Smarsly, K. (2024). Personalized low-cost thermal comfort monitoring using IoT technologies. Indoor Environments, 1(4), 100048.

Hendajani, F., Mughni, A., Wardhani, I. P., & Hakim, A. (2022). Modeling Automatic Room Temperature and Humidity Monitoring System with Fan Control on the Internet of Things. ComTech: Computer, Mathematics and Engineering Applications, 13(2), 75-85.

Hendry, I. (2019). ESP32 Development using the Arduino IDE.

Iriho, K. (2022). IoT based smart fan controller and fire prevention in computer laboratory (Doctoral dissertation, NM-AIST).

Joha, M. I., Islam, M. S., & Ahamed, S. (2022, December). IoT-Based Smart Control and Protection System for Home Appliances. In 2022 25th International Conference on Computer and Information Technology (ICCIT) (pp. 294-299). IEEE. https://doi.org/10.1109/ICCIT57492.2022.10054941.

Kommey, B., Dunyo, J. K., Akowuah, B. Y., & Tamakloe, E. (2022). Automatic ceiling fan control using temperature and room occupancy. JITCE (Journal of Information Technology and Computer Engineering), 6(01), 1-7.

Mutaqin, M. Z., Favian, M. E., & Kurniawan, A. (2024). Sistem smart home pemantauan dan pengendalian suhu ruangan menggunakan Arduino ESP32 berbasis green energy. JUPITER: Journal of Computer & Information Technology, 5(2), 101-113.

Rao, G. J., Satish, G., Abhinav, D., & Ganesh, P. S. (2018). Temperature Controlled Fan using IOT. International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN, 2395-1990.

Resquites, J., Parrocho, M., Vinegas, N., & Oquiño, V. (2023). IoT-Based Temperature Monitoring and Automatic Fan Control Using ESP32. Iconic Res. Eng. J, 7, 35-44.

Shah, S. K. A., & Mahmood, W. (2020). Smart home automation using IOT and its low cost implementation. International Journal of Engineering and Manufacturing, 10(5), 28.

Spanulescu, S. (2018). ESP32 programming for the Internet of Things. Lulu Press, Inc.

Taiwo, O., & Ezugwu, A. E. (2021). Internet of things‐based intelligent smart home control system. Security and Communication Networks, 2021(1), 9928254. https://doi.org/10.1155/2021/9928254.

Zhao, L., Yang, Y., & Wu, Z. (2022). Review of Communication Technology in Indoor Air Quality Monitoring System and Challenges. Electronics, 11(18), 2926.

Downloads

Published

2025-09-10

Issue

Vol. 6 No. 3 (2025): September

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC-BY 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

License: All articles are licensed under CC BY 4.0

How to Cite

Pengembangan Sistem Kipas Angin Pintar Berbasis IoT untuk Pemantauan Suhu dan Kelembapan secara Real-Time. (2025). Jurnal Indonesia : Manajemen Informatika Dan Komunikasi, 6(3), 1931-1938. https://doi.org/10.63447/jimik.v6i3.1607

Most read articles by the same author(s)

1 2 3 > >>